Installing Rainwater Harvesting System

 Installing Rainwater Harvesting System

Installation of rain water harvesting system is not an easy task. The following steps must be taken into consideration while installing rain water harvesting for house.

Installing Rainwater Harvesting System

Step1: Deciding where to place the water harvester

The ideal place to install the rain water harvester is beside the roof drain pipe where most of the rain water can be easily diverted.

Step2: Fixing of PVC and downpipes

The next step will be fixing the PVC pipes leading to the storage tanks to transport the water into the tanks. Then fix the downpipes and ensure it is remained fixed vertically to the wall with the support of clamps.

Step3: Installation of washout pipes

Washout pipes are the separator that is basically a valve used for cleaning the roof. The valve needs to be cleaned after the rain to maintain the flow of waste water.

Step4: Storage tank filter

In order to get clean and fresh water, the storage tanks must be installed with filters.

Step5: Placing of storage tank

The next step will be to install the storage tank. It is advised to install the storage tanks in an upraised area to keep them away from the reach of pets and other animals and to prevent the growth of germs and bacterias. Make sure it is tightly covered.

Step6: Installation of the overflow pipe

The final step is to install an overflow pipe to release the excess water from the storage tank.

Read More Rain Water Harvesting

Comments

Popular posts from this blog

Different Steps In Waste Water Treatment

Let Us Understand How A Sewage Treatment Plant Works

Effluent treatment plant manufacturers 2021